Zigbee POE Dongle
zigbee2mqtt dongle
Introductions
Coolseer Zigbee POE Dongle is used to work as zigbee gateway for home assistant throught zigbee2mqtt.
Parameters
1. Model: COL-ETMG21
2. Wireless: Zigbee 3.0
3. Zigbee Soc: EFR32MG21
4. Hardware: 72MHZ Cortex-M4, 768KB Flash, 256KB SRAM, 802.15.4:+19.5dBm(PA)
5. Input: Type C 5V 1A or POE 48V
6. Antenna: 5dBi
7. Size: 82*67*22.5mm
8. Antenna Size: 13*200mm
9. Weight: 90g
Note: Default Zigbee firmware, support to burn or pre install firmware to work with matter over thread, one time could only run one protocol
Need work in the same LAN with HA server
1. Model: COL-ETMG24
2. Wireless: Zigbee 3.0
3. Zigbee Soc: EFR32MG24
4. Hardware: 78MHZ Cortex-M33, 1536KB Flash, 256KB SRAM, 802.15.4:+19.5dBm(PA)
5. Input: Type C 5V 1A or POE 48V
6. Antenna: 5dBi
7. Size: 82*67*22.5mm
8. Antenna Size: 13*200mm
9. Weight: 90g
Note: Default Zigbee firmware, support to burn or pre install firmware to work with matter over thread, one time could only run one protocol
Need work in the same LAN with HA server
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
©2013-2023 Shenzhen Coolseer Technology Co., Ltd. ALL RIGHTS RESERVED
